SunWave™ Red Light · SW300

Clinical-grade red light,
engineered for everyday use.

The SW300 delivers 120 dual-chip LEDs of 660nm red + 850nm near-infrared light in a sleek, flicker-free tabletop panel. Smoother skin, faster recovery, calmer body — in sessions you can actually fit into your day.

660nm Red 850nm Near-Infrared 120 Dual-Chip LEDs Flicker-Free FDA-Registered Class II
SunWave SW300 red light therapy panel in use
120 LEDs
Dual-chip 660 + 850nm
37%
Smoother skin in 4 weeks*
6.3 lb
Portable & travel-ready
3 modes
Red · NIR · Combined
Meet the SW300

A full-body panel in a footprint that fits your life.

Most red light panels force a trade-off: clinic-level power or convenient size. The SW300 gives you both. Its 120 medical-grade dual-chip LEDs pack more therapeutic output per square inch than typical home panels — in a frame light enough to move from the desk to the bedroom to the gym.

  • Dual wavelength: 660nm + 850nm
  • Stable, flicker-free driver
  • Adjustable timer & brightness
  • Red, NIR, and combined modes
  • Pulse mode for sensitive areas
  • Adjustable stand + mountable
SW300 dimensions and LED detail
660nm and 850nm skin penetration diagram
The Science

Two wavelengths. Every layer of skin.

Red light at 660nm is absorbed at the surface, where it supports collagen, elasticity, and skin texture. Near-infrared at 850nm penetrates deeper — reaching muscle, joint, and connective tissue to help with recovery and circulation. The SW300 delivers both at the same time, through a dual-chip LED design that blends them evenly across the panel.

660nmRED
Surface rejuvenation
Targets the epidermis and upper dermis for tone, texture, fine lines, and visible skin quality.
850nmNIR
Deep tissue recovery
Penetrates into muscle, joints, and fascia to support post-workout recovery and comfort.
What It Does

Three benefits, one session.

10 to 20 minutes in front of the SW300 covers the three areas most people reach for red light in the first place — skin, muscles, and circulation.

Skin renewal with the SW300
Skin

Skin Renewal Boost

Supports epidermal renewal to refine texture, enhance elasticity, and visibly smooth fine lines over consistent use.

Muscle recovery with the SW300
Recovery

Muscle Relaxation & Recharge

Red and near-infrared light help tired muscles unwind, easing post-workout tightness and supporting overall condition.

Circulation with the SW300
Wellness

Circulation Meets Wellness

When discomfort eases and blood flow improves, your body feels the difference — that's exactly where the SW300 comes in.

Before and after 4 weeks of SW300 use
Visible Results

A difference you can see in 4 weeks.

37%
Smoother-looking skin

In studies of dual-wavelength red + NIR light therapy, users report visibly smoother texture and improved radiance in just weeks of consistent use. The SW300 is built to make that consistency easy — light it, sit in front of it, and let it work.

Pro tip: Use 5+ times a week, 20+ minutes per session, at a distance of 6–12 inches for skin and 12–18 inches for full-body wellness.
Simple Controls

Powerful options. One clean panel.

On/off, timer, brightness, pulse, and channel switching — all from a tidy digital touch panel. Three onboard memory presets let you go from skincare to recovery in a single tap.

P1 · Red only — gentle skin sessions
P2 · NIR only — deep-tissue recovery
P3 · Combined — full-spectrum wellness
SW300 digital control panel and presets
Higher Output

30° optical lens. Up to 20% more efficient light.

Instead of scattering light in all directions, a precision 30° lens focuses the beam toward your body — meaning more therapeutic photons actually reach the skin, with shorter session times and a more uniform treatment area.

High-output 30 degree optical lens
Flicker-Free

Steady light. Comfortable sessions.

A stable current design eliminates the flicker that can cause eye fatigue and headaches with cheaper panels — so you can relax through a full session, even with eyes open (glasses still recommended).

Flicker-free light experience
Dual-Chip LED Design

Mixed 660 + 850nm. In every LED.

Each diode emits both wavelengths, blended inside a single chip. The result: deeper, more uniform light across the full panel — no red stripe here, infrared stripe there. Just consistent therapy, edge to edge.

Dual-chip LED design with 660nm and 850nm
How To Use It

Treat any area, in minutes.

Sit or stand 6–18 inches from the panel, uncovered skin facing the LEDs. Start with shorter sessions and build up as your skin gets comfortable with the light.

How to use the SW300 — shoulder, back, joint
Shoulder Area
20–35min

Tension relief and mobility support for desk workers and athletes.

Back Area
30–45min

Larger surface, longer session — great for lower-back discomfort after long days.

Joint Area
25–35min

Knees, elbows, wrists — target individual joints with focused NIR penetration.

The Specs

Built like a clinic. Sized for your home.

Engineered from the diode up — the SW300's LEDs, driver, lens, and housing are all built for therapeutic-grade consistency without the industrial footprint of full-body panels.

LEDs
120 · Dual-Chip
Wavelengths
660nm + 850nm
Modes
Red / NIR / Combined + Pulse
Lens Angle
30° optical
Dimensions
8.3" × 14.7" × 2.4"
Weight
6.3 lb / 2.84 kg
Controls
Touch + timer + brightness
Setup
Tabletop stand · Wall-mountable
SW300 specifications and dimensions

Designed for every space.

Home · Gym · Studio · Wellness

SW300 used in home, gym, studio, and wellness settings
SW300 safety and usage tips
Use It Safely

A few things to know.

  • Test light sensitivity for 5–10 minutes before your first full session.
  • We recommend wearing the included glasses during use.
  • Expect gentle warmth — the SW300 is a light device, not a heat lamp.
  • Keep the panel away from water, heat, and humidity.
  • Consistency matters more than intensity: aim for 5+ sessions a week.
FAQ

Questions, answered.

How is the SW300 different from other home red light panels?
Most home panels use single-wavelength LEDs grouped into separate zones. The SW300 uses dual-chip LEDs — each diode emits both 660nm and 850nm — combined with a 30° optical lens for higher usable irradiance across the whole panel. In practice, that means more uniform coverage, shorter sessions, and fewer cold spots.
How long until I see results?
Most users notice a calmer, more radiant look within 2–3 weeks of consistent use. Skin-texture changes typically show around the 4-week mark with 5+ sessions per week, 20 minutes per session. Recovery and soreness benefits are often felt after the first few sessions.
Can I use it on my face?
Yes. Start at a distance of 10–12 inches for 5–10 minutes and work up to 15–20 minutes. Always wear the included eye protection and keep eyes closed during facial sessions.
Does it get hot?
You'll feel a gentle warmth, but the SW300 is a photobiomodulation device — not an infrared sauna. An internal cooling fan keeps the LEDs at their optimal operating temperature so output stays consistent throughout your session.
Is it safe for daily use?
Yes. Red and near-infrared light at these wavelengths are well-studied for daily use. We recommend 5+ sessions per week of 15–30 minutes depending on the area. If you're pregnant, photosensitive, or taking medication that affects light sensitivity, consult your physician first.
What's in the box?
SW300 panel, adjustable desktop stand, door-hanging hardware, power cable, protective goggles, remote, and quick-start guide.
What's the warranty?
The SW300 is covered by a 3-year limited warranty and a 60-day satisfaction guarantee — if it isn't for you, send it back.

Make red light a habit, not a hassle.

The SW300 is small enough to keep out, powerful enough to deliver real results, and simple enough to actually use every day. Start your 60-day trial today.

Shop the SW300 →
Free U.S. shipping 60-day returns 3-year warranty FDA-registered Class II
Customer Reviews

What SW300 Owners Are Saying

4.9 /5
24 reviews